|
Product Details:
|
| Usage: | Home Appliance,Electric Bicycle,Robot | Speed(rpm): | 17-2836rpm |
|---|---|---|---|
| Type: | Micro Encoder Planetary Gear Motor | Protect Feature: | Totally Enclosed |
| Torque: | 0.37-28.4kg.cm | Voltage(v): | 24VDC |
| Product Name: | Encoder Planetary Gearbox Motor | Diameter: | 28mm Diameter |
| Typical Applications: | Electric Toy Model,Curtain And Others | Shaft Diameter: | 6MM |
| Highlight: | 340RPM Planetary Micro Gear Motor,340rpm 24V Micro Gear Motor,340rpm planetary dc motor |
||
340 RPM 12 Volt Gear Reduction Motor Planetary Micro Gear Motor With Encoder
Hall Encoder 28Dim Planet deceleration Geared Motors Silent Long Life Lare Torque DC 12V 340 RPM
Rated voltage:12VDC,Voltage range:0-12VDC
Metal Planetary Gear
Torque:Max 7kg.cm
Power: Max 6W
Direction: CW, CCW
Dynamic load test datasheet: 12V 340RPM
| Model number: | PG28-395 | |||||||||||||
| Rated DC 24V testing parameter datasheet | ||||||||||||||
| Reduction ratio(1:00) | 3.353 | 4.636 | 11.243 | 15.544 | 21.492 | 37.696 | 52.12 | 72.064 | 99.639 | 126.396 | 174.76 | 241.632 | 334.09 | 461.27 |
| No Load speed (rpm) | 2386 | 1726 | 712 | 515 | 372 | 212 | 153 | 111 | 80 | 63 | 46 | 33 | 24 | 17 |
| No Load Current (A) | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
| Rated torque(kg.cm) | 0.37 | 0.43 | 0.74 | 1.79 | 2 | 2.26 | 3.39 | 4.06 | 4.73 | 5 | 15.63 | 17.84 | 26.3 | 28.4 |
| Rated speed (rpm) | 1324 | 1243 | 562 | 322 | 260 | 174 | 112 | 90 | 71 | 53 | 35 | 27.3 | 19 | 15 |
| Rated Current(A) | 0.764 | 0.623 | 0.462 | 0.615 | 0.55 | 0.407 | 0.534 | 0.44 | 0.359 | 0.345 | 0.634 | 0.515 | 0.611 | 0..42 |
| Output(w) | 5.13 | 5.59 | 4.35 | 6.03 | 5.44 | 4.1 | 3.94 | 3.82 | 3.51 | 2.78 | 5.71 | 5.1 | 5.18 | 4.46 |
| Stall Torque (kg.cm) | 0.86 | 1.35 | 3 | 4.32 | 6.5 | 11 | 12.2 | 17 | 22.8 | 29.6 | 37.2 | 54.2 | Forbidden Stall | |
| Stall Current(A) | 1.464 | 1.72 | 1.54 | 1.525 | 1.518 | 1.61 | 1.86 | 1.526 | 1.5641 | 1.525 | 1.488 | 1.525 | ||
| Gearbox Length(mm) | 23.2 | 29.8 | 36.4 | 43 | ||||||||||
| Weight(g): | 140 | 160 | 180 | 200 | ||||||||||
dynamic curve of the motor
|
1. Metal Gears 2. The rotor are all made of pure copper coil, which makes the operation and service life of the motor more stable. |
Dimensions(unit:mm):
|
Using the Encoder: A two-channel Hall effect encoder is used to sense the rotation of a magnetic disk on a rear protrusion of the motor shaft. The quadrature encoder provides a resolution of 16 pulses per revolution of the motor shaft when counting both edges of both channels. To compute the counts per revolution of the gearbox output, multiply the gear ratio by 16. The motor/encoder has six color-coded, 8″ (20 cm) leads terminated by a 1×6 female header with a 0.1″ pitch, as shown in the main product picture. This header works with standard 0.1″ male headers and our male jumper and precrimped wires. If this header is not convenient for your application, you can pull the crimped wires out of the header or cut the header off. The following table describes the wire functions: |
FAQ
Contact Person: Mrs. Maggie
Tel: 15818723921
Fax: 86--29880839
