25mm BLDC Brushless DC Gear Motor 24V 2000RPM CCW CW Brake PMW Speed Control

Wiring method introduction

Black line : Connect DC power supply negative - (Prohibit errors) Red line: Connect DC power supply positive + (Prohibit errors) The red wire is connected to the positive pole of the power supply; the black and white wires are connected to the negative pole of the power supply, and the motor rotates clockwise. The red wire is connected to the positive pole of the power supply; the black wire, the white wire, the orange wire, and the three wires are connected to the negative pole of the power supply at the same time, and the motor rotates counterclockwise. Yellow line: Signal line, the motor rotates one turn and output 18 pulse signals White line: Duty cycle, pulse width speed regulation 15-25khz (The current line of controls the motor to change clockwise or counterclockwise. Connect the orange line to the black line and the motor will change the direction of rotation immediately. (Overcurrent protection 0.8A; once the current is exceeded, the motor will Stop working immediately, and the motor can be re-run after the power is connected again.) For the connection method of the motor and brushless controller, you can contact us and we will guide you.

• 

  Model: JGA25-2418		No load			On Load				Stall		Size(L)	Weight
  		Rated Voltage	Speed	Current	Speed	Current	Torque	Power	Torque	Current
  Workable Voltage	Reduction Ratio	V	rpm	ma	rpm	ma	Kg.cm	W	Kg.cm	A	mm	g
  12-24V	4.4	24	1977	50	1500	168	0.15	2.2	0.6	0.8	18	100
  12-24V	9.6	24	900	50	682	168	0.3	2.2	1.4	0.8	18	105
  12-24V	21.3	24	408	50	308	168	0.7	2.2	3	0.8	19	110
  12-24V	35	24	245	50	185	168	1.17	2.2	5	0.8	20	115
  12-24V	47	24	186	50	140	168	1.5	2.2	6.7	0.8	20	115
  12-24V	78	24	111	50	85	168	2.8	2.2	11	0.8	22	120
  12-24V	103	24	85	50	64	168	3.4	2.2	15	0.8	22	120
  12-24V	171	24	50	50	38	168	5.6	2.2	24	0.8	24	125
  12-24V	226	24	38	50	29	168	7.5	2.2	24	0.8	24	125
  12-24V	377	24	23	50	17	168	12.5	2.2	24	0.8	26	130
  12-24V	500	24	17.5	50	13	168	16.5	2.2	24	0.8	26	130
  12-24V	4.4	12	990	35	740	76	0.03	0.6	0.2	0.45	18	100
  12-24V	9.6	12	453	35	340	76	0.07	0.6	0.46	0.45	18	105
  12-24V	21.3	12	204	35	150	76	0.16	0.6	1	0.45	19	110
  12-24V	35	12	122	35	90	76	0.28	0.6	1.7	0.45	20	115
  12-24V	47	12	93	35	70	76	0.37	0.6	2.26	0.45	20	115
  12-24V	78	12	55	35	40	76	0.6	0.6	3.7	0.45	22	120
  12-24V	103	12	42	35	30	76	0.8	0.6	5	0.45	22	120
  12-24V	171	12	25	35	19	76	1.3	0.6	8.2	0.45	24	125
  12-24V	226	12	19	35	14	76	1.8	0.6	11	0.45	24	125
  12-24V	377	12	11	35	8	76	3	0.6	18	0.45	26	130
  12-24V	500	12	8.5	35	6	76	4	0.6	24	0.45	26	130