JGA20-180 DC Motor: Problem Analysis and Optimization Solutions
In the field of smart devices, miniature DC motors, as key power components, directly affect the overall performance of the products. Recently, a smart device manufacturer adopted the 20mm diameter JGA20-180 DC motor in its new product, expecting it to provide efficient, quiet, and stable power support. However, during the product testing phase, the R&D team encountered several issues that significantly impacted the performance of the product and the user experience.
I. Background
The manufacturer was developing a new smart electric curtain and chose the JGA20-180 DC motor to power it. The expectation was that the motor would provide a high level of performance in terms of efficiency, noise reduction, and stability. However, during the testing phase, it was discovered that the motor had some operational issues that could potentially affect the product's market competitiveness.
II. Problem Description
(1) Noise Issue
During operation, the motor generated relatively high noise levels, especially when running at low speeds. This not only affected the user experience but also had the potential to cause noise pollution in residential environments.
(2) Unstable Torque Output
Under high load, the motor's torque output fluctuated significantly, resulting in an uneven opening and closing process for the curtains. This instability not only affected the device's operational efficiency but also raised concerns about potential long-term mechanical issues.
(3) Heat Dissipation Problem
After prolonged operation, the motor's temperature increased, affecting the stability and lifespan of the device. This issue was particularly noticeable during high-frequency use and could lead to overheating and automatic shutdown of the device.
III. Problem Analysis
(1) Noise Issue
The noise primarily originated from the meshing of gears inside the motor and vibrations of the motor housing. At low speeds, the meshing frequency was lower, but each meshing event released a significant amount of energy, resulting in more noticeable noise.
(2) Unstable Torque Output
The instability in torque output was likely due to an imprecise control algorithm that caused significant current fluctuations when the load changed, thereby affecting torque delivery. Additionally, there might have been design flaws in the motor's gear transmission system that led to uneven torque transfer.
(3) Heat Dissipation Problem
The poor heat dissipation was probably due to inadequate cooling design in the motor, preventing heat from being effectively dissipated. As a result, the internal temperature of the motor increased during extended operation, impacting its performance and longevity.
IV. Solutions
(1) Noise Optimization
-
Gear Design Improvement: Replaced spur gears with high-precision helical gears to optimize the gear meshing angle and reduce noise during meshing.
-
Sound-Insulating Materials: Added sound-insulating materials, such as rubber pads or sound-absorbing sponges, inside the motor housing to absorb noise generated during operation.
-
Motor Installation Optimization: Ensured that the motor was securely fastened during installation to reduce housing vibrations and, consequently, lower noise levels.
(2) Enhancing Torque Stability
-
Control Algorithm Optimization: Implemented a closed-loop control algorithm to monitor the motor's current and torque output in real-time and automatically adjust operating parameters according to load changes to ensure stable torque delivery.
-
Torque Compensation Module: Integrated a torque compensation module into the motor control system to dynamically compensate for torque output through software algorithms, reducing torque fluctuations during startup and shutdown.
(3) Heat Dissipation Optimization
-
Heat Sink Addition: Installed heat sinks on the motor housing to increase the surface area for heat dissipation and improve cooling efficiency.
-
Internal Structure Optimization: Redesigned the air flow channels inside the motor to add ventilation holes, ensuring effective heat dissipation during operation.
-
Thermal Conductive Materials: Applied thermal conductive silicone to key components inside the motor to quickly transfer heat to the housing, further enhancing cooling performance.
V. Implementation Results
(1) Noise Reduction
After optimization, the motor's operating noise was reduced from 45 decibels to 30 decibels, significantly improving the user experience and reducing noise pollution in residential settings.
(2) Enhanced Torque Stability
Torque output stability was improved by 30%, resulting in a smoother opening and closing process for the curtains and a noticeable increase in the device's operational efficiency. The long-term stability of the motor was also enhanced.
(3) Improved Heat Dissipation
The motor's operating temperature was reduced by 20%, eliminating instances of overheating and automatic shutdown, and significantly enhancing the device's continuous operation capability.
VI. Conclusion
By addressing the noise, torque stability, and heat dissipation issues of the JGA20-180 DC motor, the R&D team successfully resolved the practical problems encountered in the application, significantly enhancing the performance and user experience of the smart electric curtains. These improvements not only solved the immediate issues but also provided valuable insights for similar application scenarios. Looking ahead, with continuous technological advancements, the JGA20-180 motor is expected to play a significant role in more smart devices, bringing greater convenience and innovation to people's lives.